ABB Acs150 1.5kw 400v 3ph Ac Inverter Drive - C3 Emc

ABB Drives ACS 150 AC Frequency Inverter with Keypad and Potentiometer for 1.5kW (2HP) 400V 3 Ph motor in VxF control to 4.1A. Simple to set-up with 400V three phase input for a standard AC Induction motor.

R1 Size - 70mm Wide x 161mm Deep x 202mm high (plus cable clamp plate at 37mm) IP20 case.

Overload - 150% x 60seconds.
Speed Control Range - 0/500Hz.
Braking - To 130 Ohm Minimum, 300 Ohm Maximum external resistor (not supplied) - see the Resistor options linked below or use the 'Which Resistor' button on this page.

Features - Front Mounted Potentiometer, 1 x Analogue Input, 5 Digital Inputs, 1 Relay Contact set.
Programmable from a pc via 'Flashdrop'.
EMC Filters to EN61800-3 to the 2nd Environment C3 (Industrial).

Input Current - 6.9A, or 3.5A when supplied via a minimum 4.6mH AC Input choke (see the products linked below) to reduce the metered kVA from 4.7kVA per drive, to 2.4kVA.
Input Voltage - 380 to 480V three phase +-10% at 50/60Hz.

Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below - 75mm.
Ventilation space at sides - 0mm.
Heat Loss at max output - 58W.
Mounting onto symmetrical DIN rail or use the screw fixings for side or rear mounting.